There are 3 simple steps to make sure your air line installation is providing the right pressure and that your accessories selection is correct, so you can ultimately work productively. It does not take long and it is something you can easily do yourself using our self-diagnostic checklist.
3 steps to check that your air line is set up correctly: it’s as easy as 1, 2, 3…
Step 1: Calculate if there is an air pressure drop between the FRL and the tool.
First, read the FRL gauge value
Secondly, measure the dynamic pressure at the tool’s inlet
Then, calculate the difference between the two values to see if there is a drop in air pressure between the FRL and the tool
In the air tool installation, most of the pressure drops occur between the pipe-end and the tool
Step 2: Identify where pressure is being lost by checking that your accessories have been selected and installed properly.
There are various points to inspect, the main ones being: at the tool inlet, the couplings/nipples and hose connections, as well as the FRL.
To avoid pressure drops you want to make sure that:
Accessories have the correct diameters and thread sizes/types
The hose is not longer than needed
Clamps are properly tightened
Step 3: Final measurements and adjustments.
Once you are confident that all accessories have been selected & installed correctly, measure once more the dynamic pressure at the tool’s inlet.
You can then adjust accordingly the FRL regulator to ensure you get a reading of 90 psi / 6.3 bars at the tool inlet.
When it comes to air pressure, higher isn’t always better!
The advancements in aluminum manufacturing technologies and processing equipment have made it an increasingly popular alternative, especially in applications that require a lightweight yet durable and corrosion-resistant material. The transport...
FRLs – Filters, Regulators and Lubricators – guarantee the efficiency and durability of pneumatic tools. Including an FRL in your air system is vital to running an efficient air line set-up and key to achieving a good return on investment. Adding an...