Your browser is not supported

You are using a browser we do not support any longer. To continue visiting our website, please choose one of the following supported browsers.


Not quite sure about what you are looking for?

Use the links below to jump directly to the most searched topics



Torque limited (in forward)
Full powerful (in reverse)


1 position torque limited in forward around 66 ft.lbs / 90 Nm
960 ft.lbs / 1,300 Nm of maximum torque
One-hand reverse system (Ring system)
6.89 in. / 175 mm of length
Hard anodized end plates
Hard chromium aluminum cylinder
Twin hammer mechanism
4.4 lbs – 2.0 kg thanks to its composite motor housing
Curved handle with rubber material
Resistant to most chemicals used in workshops
Rubber grip at the back
Does not slip when it is in operator’s hand even if it is dirty or oily

Part number8941077487
Actual air consumption12 l/s25 cfm
Air inlet thread size1/4 "
Average air consumption3 l/s6.2 cfm
Blows per minute1350
Box dimensions95x210x240 mm3.75x8.25x9.45 "
Clutch typeTwin Hammer
Dimension A65.4 mm2.57 "
Dimension B69.8 mm2 3/4 "
European Directives2006/42/EC (17/05/2006)
European Sound standardISO 15744
European StandardsEN ISO 11148-6:2013
Free speed7000 rpm
Free speed (fwd)2400 rpm
Handle typePistol
Height200 mm7.87 "
Length175 mm6.89 "
Maximum Torque (reverse)1300 Nm960 ft.lbs
Min. hose size10 mm3/8 "
Net weight2 kg4.4 lb
Side to center39 mm1 1/2 "
Socket retainerFriction ring
Sound Power105.3 db(A)
Sound pressure94.3 db(A)
Sound uncertainty3 db(A)
Square drive1/2 "
Vibration12 m/s²
Vibration (fwd)7.57 m/s²
Vibration ISOISO 28927-2
Vibration uncertainty (K)4.5 m/s²
Width78 mm3 "
Working Torque Range (fwd)90 - 140 Nm66 - 103 ft.lbs