We recommend that the humidity is always to be reduced by drying. This is easiest and cheapest done with a refrigerant dryer that gives a pressure dew point of about 3 degrees Celsius. We also recommend installing particle filters, to reduce the amount of particles that come into the compressed air. In addition to particle filters you should also install an oil separating filter, that removes the residual amount of oil, that always comes with compressed air when you have an oil injected screw compressor. If you want to be absolutely sure, that no oil will be included in the compressed air, you can complete the filters above with an activated carbon filter. When supplementing other filters with an activated carbon filter, one achieves a quality called "technical oil-free" compressed air.
Please contact us directly if you have questions or need for compressed air that will be used for all types of paint jobs, and we will help you, improve your existing installation or give recommendations for a new installation.