Not quite sure about what you are looking for?

Use the links below to jump directly to the most searched topics

When do you use a nutrunner versus an impact wrench?


2017년 8월 21일 (월)

In other words, why should you invest in nutrunners when you already have impact wrenches in your tool fleet? Let’s have a detailed look at both tools:

  • Impact Wrenches


An impact wrench is a socket wrench power tool designed to deliver a high-torque output with minimal exertion by the user. It stores energy in a rotating mass, accelerated by the motor, to then delivers it suddenly to the output shaft (the anvil), creating a high-torque impact. This system does not require a reaction arm and therefore doesn’t need a reaction surface to be operated.

The hammer mechanism is designed in such a way that after having delivered the impact, the hammer will go back to spin freely and will not stay locked. Thanks to this design, the only reaction force applied to the body of the tool is the one of the motor accelerating the hammer. As a result the operator feels very little torque, even though a very high peak torque is delivered to the socket.

The hammer design requires a certain minimum torque to allow the hammer to spin separately from the anvil. If only low torque is needed, then the tool will stop hammering and will instead smoothly drive the fastener, rapidly installing or removing it. It is the high number of repetitions of impacts that generates a high level of vibrations and noise.

Impact wrenches are mainly used for dismantling nuts as they do not deliver accuracy for bolting.

  • Nutrunners

pneumatic torque wrench, also referred as "nutrunner" is a planetary torque multiplier, or a gearbox coupled with a pneumatic air motor. Outside the gearbox is a reaction device which is used to absorb the torque and allow the tool operator to use it with very little effort. The torque output is adjusted by controlling the air pressure.

A nutrunner is used in situations where the tightness of screws and bolts is crucial. It allows the operator to measure the torque applied to the fastener so it can be matched to the specifications of a particular application. These planetary torque multiplier gearboxes have multiplication ratios and are primarily used anytime accurate torque is required on a nut and bolt or when a stubborn nut needs to be removed.

The pneumatic torque wrench is sometimes confused with a standard impact wrench, due to their similar appearance. The main difference is that a pneumatic torque wrench is driven by continuous gearing versus hammering for the impact wrench. All necessary torque is handled by the gearbox and the reaction arm. Having a reaction arm requires having a reaction contact like a nut or a strong metallic surface.

A nutrunner has a very low vibration level and excellent repeatability and accuracy, making it perfect for bolting.

Christophe Roland, Very High Load Specialist

“It’s all about the job specification and accuracy needs. In demanding applications where safety is crucial, you must ensure you get the right torque, not too loose, not too tight. It is essential you get the appropriate tool for what you need to do.”

Christophe Roland , Very High Load Specialist at Chicago Pneumatic
Chicago Pneumatic Experts - what gives power to an impact wrench - how does a pneumatic grinder work

Keep Learning With Our Experts

Stay connected and receive all our latest expert articles

Subscribe to our newsletter


Experts' articles

토크 값 간에 차이점은 무엇일까요?

25 6월, 2018

토크 값을 측정하는 업계 표준은 없으며, 공구 제조업체마다 서로 다른 방식으로 토크를 표시하고 있습니다. 서로 다른 다양한 토크 측정 방법은 궁극적으로 작업자가 장비를 선택하고 작동시키는데 큰 혼란을 야기합니다.

에어 공구를 지속적으로 유지보수하고 작업간 공구 성능을 최적화하는 방법

23 4월, 2018

에어 공구는 작업 강도가 높은 작업에 최적화 되어 산업 환경에서 중요한 역할을 하지만 공구 관련한 유지보수의 중요성은 쉽게 간과되어지는 경향이 있습니다. 그러나 에어 공구에 대한 올바른 관리는 생산성을 보장하고 고객의 요구 사항과 작업자의 안전 기준을 충족시키는 데 있어 굉장히 중요합니다.