Close

Carga

22 de julio de 2019

With the right tool, drill bit and speed, virtually any material can be drilled. Whether you’re drilling through composite material or hardened steel for an oil and gas or metal-working application, the drill’s speed has the most impact on the qualit...

Story visual

25 de junio de 2019

We often get asked this age-old question: “Should I choose pneumatic or electric power tools?” Many users believe that one tool technology is best for everyone and every application. But that’s just not true.

Story visual

27 de mayo de 2019

Making your workplace as safe as possible to minimize the risk of accidents is one of your highest priorities. Here are some best practices you can take to improve safety when using pneumatic tools, while also decreasing your company’s total cost of ...

Story visual

23 de abril de 2019

Follow our 3 simple steps to make sure your air line installation is providing the right pressure and that your accessories selection is correct.

Story visual

24 de marzo de 2019

Your tool stalls or is not working to its expected performance and you find yourself asking ‘why is my angle grinder spinning too slowly?’, or ‘why has my pneumatic grinder stopped working?’, read on.

Story visual

8 de marzo de 2019

Chicago Pneumatic has introduced a new powerful ½” impact wrench for vehicle service specialists. Built upon the heritage of the successful previous model, the CP7748 has been designed to offer operators unparalleled levels of power, comfort and dura...

Story visual

20 de noviembre de 2018

Working on roadside assistance jobs can be challenging to provide the same high-quality results as you do the job in the workshop. Here are some tips to do your job quickly and efficiently, while ensuring safety and productivity.

Story visual

16 de noviembre de 2018

Chicago Pneumatic is introducing its new range of industrial vertical grinders, the CP3330 and CP3340 series, to foundry workers, metal fabricators and MROs worldwide. These industrial tools set a new high standard in terms of productivity and operat...

Story visual

15 de octubre de 2018

Pneumatic impact wrenches were originally meant for loosening stubborn nuts and bolts. However, nowadays mechanics use impact wrenches for tightening bolts too, for example on wheels, so they can do their jobs faster, with more efficiency, and increa...

Story visual

17 de septiembre de 2018

Power tools are a key to productivity in the oil & gas or the metal working industry. Maintenance and production tasks must be carried out efficiently, however intensive use of vibrating power tools, such as grinders, can expose operators to Hand Arm...

Story visual

20 de agosto de 2018

Calibration process is a vital step in ensuring tools are working as they should be, giving correct readings, providing a safe working environment for end-users, and ensuring that companies are upholding their legal obligations. However, calibration ...

Story visual

16 de julio de 2018

Providing a safe working environment for operators is essential, especially when using pneumatic tools and compressed air. If there is a failure in the air network and the hose is not adequately clamped, the resulting whiplash could be devastating. F...

Story visual

25 de junio de 2018

There is no industry standard to measuring and reporting on torque values, and torque is presented differently by tool manufacturers. The various methods of measuring torque have ultimately led to much confusion amongst tool users as to which values ...

Story visual

29 de marzo de 2018

Professional Distributor, a magazine serving the automotive tool and equipment distribution channel, offers this month best practices on torque tools, highlighting some important information on recommending the right tool to end users.

Story visual

26 de marzo de 2018

The importance of wheel tightening is often overlooked, but an incorrectly fitted wheel can have serious consequences on the safety of a vehicle and its passengers.

Story visual

21 de febrero de 2018

The new Chicago Pneumatic composite drills are available now in ¼’’, ⅜’’ and ½’’ pistol, straight (in-line) and angle variants. The range comprises 13 models, including reversible and non-reversible options.

Story visual

14 de diciembre de 2017

FRL units ensure the air quality for your tools, optimizing tools performance and lifespan. Discover 4 things to consider when buying a Filter Regulator Lubricator.

Story visual

11 de diciembre de 2017

The new Chicago Pneumatic CP825C series is a range of composite air ratchets, ¼” and 3/8”, meant to upgrade our existing CP825 series. Offering high accessibility to tight spaces such as motor engine comportments as well as high speed for fast rundow...

Story visual

7 de noviembre de 2017

On top of the load applied by the operator on the tool (the feed force), one of the key factors impacting greatly the time taken to complete the grinding job, is the tool’s capacity to run the chosen abrasive at the right speed.

Story visual

26 de octubre de 2017

Thinking of pneumatic grinders, most of the professionals in industries such as metal working, fabrication, foundries & casting plants or even shipbuilding, would only consider the type of abrasive wheels when choosing their tool, which is not en...

Story visual

10 de octubre de 2017

In order to achieve the greatest results for vehicle body painting, clean, dry air is a requirement. Learn more about how you can optimize your air supply in order to get the best results

Story visual

5 de octubre de 2017

Chicago Pneumatic is now offering an ALL-IN-ONE solution to renew yellow headlights for light and heavy vehicles, our CP 7205-HLRK Headlight Repair Kit.

Story visual

19 de septiembre de 2017

Chicago Pneumatic Tools has been given a starring role in a new episode of TV series Wicked Inventions. The pop science series looks at the way items are invented, manufactured and used to change the world around us.

Story visual

25 de agosto de 2017

Chicago Pneumatic launches its new ergonomic seat solution, the CP87029 Ergoseat, to be used for tire changing and general mechanics in workshops or on roadside assistance. This very simple solution fits both medium and heavy vehicles.

Story visual

21 de agosto de 2017

An impact wrench is a socket wrench power tool designed to deliver a high-torque output with minimal exertion by the user. It stores energy in a rotating mass, accelerated by the motor, to then deliver it suddenly to the output shaft (the anvil), cre...

Story visual

6 de julio de 2017

Chicago Pneumatic launches its first compact and robust pneumatic nutrunner, the CP66 series, perfect for flange-related and other bolting applications in the oil & gas, power generation, and wind energy industries. It also provides a more durable, p...

Story visual

4 de julio de 2017

Chicago Pneumatic is launching two new lightweight and powerful impact wrenches for heavy vehicle tire changing applications in workshops or for roadside assistance.

Story visual

30 de junio de 2017

On June 28, 2017, Chicago Pneumatic Tool Co. opened a new tool showroom for customers and distributors at their Rock Hill location. The space spans 12,000 square feet featuring tools for numerous industries from automobile vehicle service to industri...

Story visual

18 de mayo de 2017

See what Bernard Clarke of Clarke’s Garage, in Virginia, Co Cavan in Ireland thinks of the CP7737 Angle Impact Wrench

Story visual

31 de marzo de 2017

The Chicago Pneumatic CP872 aluminum die grinder, built to excel in daily maintenance and auto body shop applications, is ideal for surface preparation, auto body. Designed for applications like chamfering, weld seam or rust removal on frames and bod...

Story visual

20 de marzo de 2017

A torque wrench is a tool used to control and apply a specific torque to a fastener such as a bolt or a nut. It is a fundamental element in general mechanics, tire changing operations and industrial maintenance & repair industries, to ensure customer...

Story visual

17 de marzo de 2017

Manufacturers specify the right tightening value for every fastener on a vehicle. This is for a reason: SAFETY, not only for the driver but also for the passengers, and anyone that will come across the vehicle.

Story visual

9 de febrero de 2017

"A clean air installation guarantees productivity and return on investment." Damien Feller, Technical Support Expert

Story visual

8 de febrero de 2017

The latest edition of Wind Energy Network magazine has featured our distributor Torque Solutions Ltd who is now carrying our full range of solutions for the renewal energy market. From impact wrenches to hydraulic bolting solutions, they are now abl...

Story visual

16 de noviembre de 2016 - 18 de noviembre de 2016

This year’s Fabtech show will feature new additions to Chicago Pneumatic’s line of industrial tools. These include new powerful screwdrivers, reversible drills, and durable steel clutch housed impact wrenches. In addition, visitors will again have ...

Story visual

6 de septiembre de 2016

We are delighted to have won this year the Innovation Awards from Professional Tools & Equipment (PTEN) magazine for our new best in class CP7737 compact angle impact wrench. This unique ultra-compact & lightweight design, already approved by our cus...

Story visual

28 de junio de 2016

Chicago Pneumatic Tools is the proud sponsor of FreestyleMX.com Inc, the longest running FMX Tour in the world. In addition to the FMX tour, Chicago Pneumatic Tools, would also like to welcome MB Motorsports to the family!

Story visual

20 de junio de 2016

Following its Tools for Colleges initiative in February, Chicago Pneumatic has made a visit to each of the five colleges that received tools to see first-hand what they thought.

Story visual

10 de mayo de 2016

At Chicago Pneumatic, all is about People. Passion. Performance. And so it is for Szabo Istvan and Miklos Laszlo, two self-made drivers belonging to the Romanian Hell Drift Team. We are very proud to support this team, and help them to rock the finis...

Story visual

9 de mayo de 2016

Carl Klinkenborg owner of Beetlebank, takes time out from his busy schedule of refurbishing air-cooled Volkswagens to evaluate the new CP75 Series grinders, designed specifically for the Industrial / MRO and Automotive markets.

Story visual

24 de enero de 2016

Whether you need to lift a classic car or a 60-ton truck or even a bus, to work both quickly and safely, you need to have the right equipment. Here is the 6-step guide to make the right choice.

Story visual

19 de enero de 2016

Chicago Pneumatic has opened new offices in Varyap Plaza, Istanbul, Turkey. The company is expanding its presence in the country with a new 300 m2 Customer Center to better meet the needs of distributors and customers across many industries.

Story visual

20 de diciembre de 2017

Need spare parts? Order Online 24/7

Story visual

22 de diciembre de 2017

Need spare parts? Order Online 24/7

Story visual

22 de diciembre de 2017

Our mechanical engineers are involved at every step of product development. They are the people who will make sure that all the pieces designed for the product will fit together precisely and will work perfectly.

21 de marzo de 2018

22 de febrero de 2018

There comes a time when the best-known products go beyond the standard they set to become must-have Classics. Chicago Pneumatic is Proud to Bring Together the Tools You Already Know: The Classic Range. For decades, these Classic Chicago Pneumatic pr...

22 de febrero de 2018

Story visual

10 de octubre de 2017

Chicago Pneumatic is a brand name in the pneumatic tool industry which has a history traced back to 1889.

22 de diciembre de 2017

The last piece of the puzzle is our Engineering Support Department (ESD), the team that manages the product’s entire life from launch to obsolescence. They are an integral part of our continuous product improvement as they learn everyday from the fie...

Story visual

22 de diciembre de 2017

To transfer a simple idea into innovation requires vision and determination. Engineers that put forward an idea must prove its worth and share its vision at every stage of its development. They have to be able to question themselves at any time: wil...

Story visual

22 de diciembre de 2017

Different types of simulation exist and are used by our team to improve our product development. 3D design is the best way to predict product behaviors quickly and easily.

Story visual

21 de febrero de 2018

Our products are designed and engineered based on our customers’ needs and challenges. We strive to innovate and improve our products to make our customers’ lives easier and more comfortable every day.

Story visual

15 de diciembre de 2017

Full product catalog and technical literature always at hand, even without internet

Story visual

15 de diciembre de 2017

With eConnect place and track your orders for tools & original spare parts, anytime, anywhere.

Story visual

15 de diciembre de 2017

A unique source of live information “in the cloud”

Story visual

28 de febrero de 2018

Direct access to CP Tools application photos, and product images usable for your catalogs through our online Multimedia Gallery.

Story visual

15 de diciembre de 2017

Exclusive monthly short eNewsletter to know more about Chicago Pneumatic Tools business.

Story visual

12 de enero de 2018

The simplest ergonomic seat with the best price/quality ratio

Story visual

9 de octubre de 2017

Ideal for vehicle service operations, the new CP worklight is designed to provide you high powerful lighting. It's a lithium-ion rechargeable worklight supplied with a plug and a car plug.

Story visual

15 de mayo de 2018

1 de agosto de 2017

Original line filters eliminate oil particles and condensate to make sure you can rely on your compressor for optimal performance.

Story visual

1 de agosto de 2017

Original compressor lubricants have a unique formula designed for optimal performance, maximizing compressor lifetime and keeping operational costs to a minimum.

Story visual

1 de agosto de 2017

Match your great compressor with a fast, easy and reliable piping solution that supports the operational excellence of your whole compressed air system

Story visual

15 de noviembre de 2017

Suitable for any compressed air solutions, our air receivers decrease the risk of unstable pressure peaks, condensate risk and multiple start/stop of the compressor. Read more

Story visual

15 de noviembre de 2017

Oil in the condensate can be an environmental risk. Remove the risk and reduce your costs with our oil-water separator!

Story visual

15 de noviembre de 2017

See our automatic condensate drains. Removes condensate, reduces risk of destructive wear of your air system.

Story visual

15 de noviembre de 2017

Chicago Pneumatic Refrigerated dryers from 350 to 84.000 l/min reliably provide dry compressed air and dewpoint up to +3С. Read more

Story visual

15 de noviembre de 2017

Atmospheric air contains impurities like: dust, hydrocarbons and water in form of humidity, which once sucked by the compressor is compressed and delivered to the line together with eventual oily particles. See how our filters take care of this issue...

Story visual

20 de junio de 2017

Built with quality components to handle tough conditions

Story visual

20 de junio de 2017

Powerful force and hitting power for excellent compaction results

Story visual

20 de junio de 2017

Powerful force and hitting power for excellent compaction results

Story visual

20 de junio de 2017

Powerful engine, superior traction and reliable operation

Story visual

20 de junio de 2017

Powerful engine, superior traction and reliable operation

Story visual

20 de junio de 2017

Built with quality components to handle tough conditions

Story visual

30 de mayo de 2017

Our regular inspection visits will provide accurate machine diagnostics and exact recommendations to keep your machinery as productive as possible.

Story visual

30 de mayo de 2017

The best choice to extend the life of your equipment and eliminate the risk of costly breakdowns.

Story visual

30 de mayo de 2017

Take your machinery to the next level with our latest solutions and technologies.

Story visual

30 de mayo de 2017

Our original filters are the best way to ensure quality

Story visual

30 de mayo de 2017

Service Plan provides scheduled service options that will match the precise needs of your machine.

Story visual

30 de mayo de 2017

Chicago Pneumatic Overhauls can offer your machinery a new lease on life by returning your equipment to its original high-quality performance standards.

Story visual

30 de mayo de 2017

Original lubricants are the best way to protect your machine investment, by both maximizing uptime and by improving the resale value of your equipment.

Story visual

15 de noviembre de 2017

Ideal for use with piston compressors that do not have an aftercooler or where air is over 130 °F.

Story visual

15 de diciembre de 2017

30 de agosto de 2017

In response to user demand and market trends for smaller, lighter tools, Chicago Pneumatic is launching its most compact and lightweight air tools for the automotive aftermarket. Our ultra-compact range is ideal for use inside the vehicle and engine ...

Story visual

30 de agosto de 2017

Chicago Pneumatic has launched a new series of air hydraulic jacks, extending its workshop equipment range for professional vehicle maintenance customers. The CP85XXX range of high quality, high lifting capacity air hydraulic jacks are perfect for ti...

19 de junio de 2017

Find here all valuable information that will help you get the best from your tools and protect the users.

15 de diciembre de 2017

The CP Cloud is an extranet dedicated to the CP Tools distributor network, it has been designed to easily share high-value information and interact with our partners.

11 de octubre de 2017

11 de octubre de 2017

1 de agosto de 2017

Use parts that were specifically designed for your compressor to keep it running like it should

Story visual

1 de agosto de 2017

See our full offering of screw compressors. Reliable fixed speed as well as highly energy efficient variable speed options. [See more]

Story visual

1 de agosto de 2017

The latest within air treatment. Protect your systems and protect the environment. Click to read more.

Story visual

1 de agosto de 2017

It is simple, really. You have work to do, customers to serve. CP is there to help you get the job done, without compromise.

6 de abril de 2018

21 de febrero de 2017

10 de octubre de 2017

Chicago Pneumatic’s dedication to the automotive industry spans decades. We understand the specific needs of maintaining and repairing cars and truck fleets. In addition to the right power tools, we also develop and build the compressed air and after...

Story visual

10 de octubre de 2017

Chicago Pneumatic Tools offers hundreds of quality air tools designed for the specific needs of the oil, gas and petrochemical industry. Based on decades of expertise in providing the right tools and equipment to professionals, we have developed a co...

Story visual

10 de octubre de 2017

Chicago Pneumatic’s dedication to the general and heavy industries spans decades.

Story visual

10 de octubre de 2017

Since its foundation in the United States in 1901, Chicago Pneumatic has truly gone global. From helping build many of America’s landmarks to our current international presence, Chicago Pneumatic has always emphasized local service to build our glob...

27 de febrero de 2017

4 de junio de 2017

Contact us today for a quote or for more information on any of our products and services.

10 de mayo de 2017

Where can I get the exploded view of my tool? How do I access the Chicago Pneumatic Online Catalog? Find the answers to all your questions in our FAQ.

10 de octubre de 2017

Answering CP industrial customers' expectation, we are introducing a new Oil and Gas and Petrochemical brochure combining the best selection of CP industrial tools, CP pneumatic tools as well as Titan hydraulic bolting solutions and accessories.

10 de octubre de 2017

Find and download the latest versions of our accessories catalogues.

23 de marzo de 2018

Chicago Pneumatic Tools offers hundreds of quality air tools designed for a wide range of maintenance and production applications: impact wrenches, ratchet wrenches, screwdrivers, drills, grinders, sanders and polishers, percussive and cutting tools,...

Story visual

10 de octubre de 2017

Chicago Pneumatic focuses on all the maintenance, repairs and refurbishing operations of the mining and construction heavy machinery.

30 de mayo de 2017

Our Chicago Pneumatic Kits provide you with all the spare parts you will need for the most common maintenance and repair operations, and it comes all in one box.

Story visual

1 de agosto de 2017

Energy Recovery: re-use up to 80% of your compressor’s thermal energy

Story visual

28 de agosto de 2017

ASIA 7.5mm / Max air flow capacity 36 cfm - 17 l/s (Delta 7.2 psi / 0.5 bar) Economical air flow 23.3 cfm - 11 l/s (Delta 2.9 psi / 0.2 bar)

Story visual

28 de agosto de 2017

EF COUPLING - ISO 6150B 8mm / Max air flow capacity 91 cfm - 43 l/s (Delta 7.2 psi / 0.5 bar) Economical air flow 57 cfm - 27 l/s (Delta 2.9 psi / 0.2 bar)

Story visual

28 de agosto de 2017

EF COUPLING - ISO6150B 11mm / Max air flow capacity 162 cfm - 76.5 l/s (Delta 7.2 psi /0.5 bar) Economical air flow 110 cfm - 52 l/s (Delta 2.9 psi / 0.2 bar)

Story visual

28 de agosto de 2017

Economical air flow 48.7 cfm - 23 l/s (Delta 2.9 psi (0.2 bar)) EF COUPLING - ASIA 7.5mm / Max air flow capacity 72 cfm - 34 l/s (Delta 7.2 psi / 0.5 bar)

Story visual

28 de agosto de 2017

Economical air flow 23.3 cfm - 11 l/s (Delta 2.9 psi / 0.2 bar) EF COUPLING - ISO 6150B 6mm / Max air flow capacity 36 cfm - 16.7 l/s (Delta 7.2 psi / 0.5 bar)

Story visual

25 de abril de 2018

ASIA 7.5mm / Max air flow capacity 36 cfm - 17 l/s (Delta 7.2 psi / 0.5 bar) Economical air flow 23.3 cfm - 11 l/s (Delta 2.9 psi / 0.2 bar)

Story visual

25 de abril de 2018

EF COUPLING - ISO 6150B 8mm / Max air flow capacity 91 cfm - 43 l/s (Delta 7.2 psi / 0.5 bar) Economical air flow 57 cfm - 27 l/s (Delta 2.9 psi / 0.2 bar)

Story visual

25 de abril de 2018

EF COUPLING - ISO6150B 11mm / Max air flow capacity 162 cfm - 76.5 l/s (Delta 7.2 psi /0.5 bar) Economical air flow 110 cfm - 52 l/s (Delta 2.9 psi / 0.2 bar)

Story visual

25 de abril de 2018

Economical air flow 48.7 cfm - 23 l/s (Delta 2.9 psi (0.2 bar)) EF COUPLING - ASIA 7.5mm / Max air flow capacity 72 cfm - 34 l/s (Delta 7.2 psi / 0.5 bar)

Story visual

25 de abril de 2018

Economical air flow 23.3 cfm - 11 l/s (Delta 2.9 psi / 0.2 bar) EF COUPLING - ISO 6150B 6mm / Max air flow capacity 36 cfm - 16.7 l/s (Delta 7.2 psi / 0.5 bar)

Story visual

5 de septiembre de 2017

High Performance Battery

Story visual

16 de enero de 2018

The simplest ergonomic seat with the best price/quality ratio

31 de julio de 2018

The most robust pneumatic nutrunner in its class with 960 ft.lbs / 1,300 Nm max.

Story visual

31 de julio de 2018

Our expertise in air angle grinders combined with the convenience and mobility of battery power into one grinder with great ergonomics, providing high comfort and improved safety thanks to the lock-off throttle.

Story visual

31 de julio de 2018

Our expertise in air angle grinders combined with the convenience and mobility of battery power into one grinder with great ergonomics, providing high comfort and improved safety thanks to the lock-off throttle.

Story visual

31 de julio de 2018

Our expertise in air angle grinders combined with the convenience and mobility of battery power into one grinder with great ergonomics, providing high comfort and improved safety thanks to the lock-off throttle.

Story visual

31 de julio de 2018

High torque & Robust

Story visual

31 de julio de 2018

Compact & High speed

Story visual

31 de julio de 2018

High torque & Robust

Story visual

31 de julio de 2018

High speed & Robust

Story visual

31 de julio de 2018

High speed

Story visual

31 de julio de 2018

Low speed

Story visual

9 de julio de 2018

Find your required spare parts and catalogues for construction equipment using our online platform.

Story visual

9 de julio de 2018

Find your required spare parts and catalogues for construction equipment using our online platform.

Story visual

7 de junio de 2018

Stay up-to-date and download the latest Chicago Pneumatic catalogs and brochures. From application catalogs (vehicle service, MRO, mining, heavy machinery, industry, accessories, and many more) to product-related brochures, quickly get the documentat...

Story visual

6 de julio de 2018

Chicago Pneumatic offers a full range of screwdrivers that are rigorously engineered to meet your demands for productivity, accuracy, and durability for the more demanding applications. To maximize operator comfort, pistol and straight handle type...

Story visual

6 de julio de 2018

The range provides saws, high speed cutters, nibblers, shears, engraving pens, riveters, caulking guns, air files, and blow guns.

Story visual

6 de julio de 2018

What if you could combine the performance of air tools with the mobility of cordless? That is exactly what CP is bringing to automotive and maintenance professionals. The new CP battery-powered tools offer the highest level of power and torque. Desig...

Story visual

6 de julio de 2018

Compact & Durable

Story visual

6 de julio de 2018

Our expertise in air angle grinders, combined with the convenience and mobility of battery power.

Story visual

17 de agosto de 2018

The most robust pneumatic nutrunner in its class with 1,900 ft.lbs / 2,600 Nm max.

Story visual

17 de agosto de 2018

The most robust pneumatic nutrunner in its class with 3,100 ft.lbs / 4,100 Nm max.

Story visual

17 de agosto de 2018

The whole Chicago Pneumatic Tools catalog in just one click

Story visual

21 de agosto de 2018

Powerful & Easy to Use

Story visual

21 de agosto de 2018

Powerful & Easy to Use

Story visual

31 de julio de 2018

Our expertise in air angle grinders combined with the convenience and mobility of battery power into one grinder with great ergonomics, providing high comfort and improved safety thanks to the lock-off throttle.

Story visual

31 de julio de 2018

The most robust pneumatic nutrunner in its class with 3,100 ft.lbs / 4,100 Nm max. and our most accurate air supply solution

Story visual

31 de julio de 2018

Our expertise in air angle grinders combined with the convenience and mobility of battery power into one grinder with great ergonomics, providing high comfort and improved safety thanks to the lock-off throttle.

Story visual

31 de julio de 2018

The most robust pneumatic nutrunner in its class with 1,900 ft.lbs / 2,600 Nm max. and our most accurate air supply solution

Story visual

31 de julio de 2018

The most robust pneumatic nutrunner in its class with 960 ft.lbs / 1,300 Nm max. and our most accurate air supply solution

Story visual

31 de julio de 2018

Air Caulking gun

Story visual