Your browser is not supported

You are using a browser we do not support any longer. To continue visiting our website, please choose one of the following supported browsers.


Not quite sure about what you are looking for?

Use the links below to jump directly to the most searched topics

CP8548 Pack


3 modes (screwing, drilling and hammer drilling)
Independent LED lighting for dimly lit work surfaces
Electronic trigger with varaible speed
Ergonomic handle fits your hand perfectly


½” spindle lock and keyless chuck
Max. torque 60 ft.lbs/82 Nm
Pack including 1 tool, 2 batteries and 1 charger
20-Volt CP20X Lithium-Ion 4Ah battery

ModelCP8548 Pack
Part number8941085480
Battery type4Ah 20V Lithium-ion
Battery voltage20 V
Chuck size1.5 - 13 mm mm1/16" - 1/2" "
Drilling capacity in brick & tile16 mm0.63 "
Drilling capacity in steel13 mm1/2 "
Drilling capacity in wood55 mm2.16 "
European DirectivesMachinery (2006/42/EC), RoHs (2011/65/EU), EMC (2014/30/EU)
European Sound standardEN62841
European StandardsEN 62841-1:2015; EN 62841-2-1:2018; EN 55014-1:2017; EN 55014-2:2015; EN50581:2012
Free speed0 - 1600 rpm rpm
Free speed 1st gear0 - 450 rpm rpm
Free speed 2nd gear0 - 1600 rpm rpm
Length240 mm9.6 "
Max torque82 Nm60 ft.lbs
Min. ambient operating temperature-18 ; 50 °C
Min. ambient storage temperature0 ; 40 °C
Net weight2.4 kg5.3 lb
Percussion under load 1st gear7200 /min.
Percussion under load 2nd gear25600 /min.
Recommended max. ambient charging temperature10 ; 38 °C
Sound Power99 db(A)
Sound pressure88 db(A)
Square drive13 mm
Stall torque82 Nm60 ft.lbs
Vibration ISOEN62841
Vibration uncertainty (K)1 1/2 m/s²
Weight without battery1.68 kg3.7 lb
Wood screws (without pre-drilling)8 mm5/16 "