Your browser is not supported

You are using a browser we do not support any longer. To continue visiting our website, please choose one of the following supported browsers.


Not quite sure about what you are looking for?

Use the links below to jump directly to the most searched topics

CP7748 + CP8917 ½” -




960 ft.lbs / 1,300 Nm of max torque in reverse position
One-hand reverse system (Ring system)
6.89 in. / 175 mm of length
Hard anodized end plates / Hard chromium aluminum cylinder / Twin hammer mechanism
4.4 lbs – 2.0 kg thanks to its composite motor housing
Name laser engraved at the back of the tool
Curved handle with rubber material
Resistant to most chemicals used in workshops
Rubber grip at the back
Does not slip when it is in operator’s hand even if it is dirty or oily


The tool is supplied with:
- A bare tool (CP7748)
- A torque wrench in (CP8917)

  Metric Imperial
Model CP7748 + CP8917 ½” -  
Part number 8940176140  
Actual air consumption 12 l/s 25 cfm
Air inlet thread size 1/4 "  
Average air consumption 3 l/s 6.2 cfm
Blows per minute 1350  
Box dimensions 95x210x240 mm 3.75x8.25x9.45 "
Clutch type Twin Hammer  
European Directives 2006/42/EC (17/05/2006)  
European Sound standard ISO 15744  
European Standards EN ISO 11148-6:2012  
Free speed 7000 rpm  
Handle type Pistol  
Height 200 mm 7.87 "
Length 175 mm 6.89 "
Maximum Torque (reverse) 1300 Nm 960 ft.lbs
Min. hose size 10 mm 3/8 "
Net weight 2 kg 4.4 lb
PSR applied S5063  
Series Alphacode G  
Side to center 39 mm 1 1/2 "
Socket retainer Friction ring  
Sound Power 105.3 db(A)  
Sound pressure 94.3 db(A)  
Sound uncertainty 3 db(A)  
Square drive 1/2 "  
Vibration 12 m/s²  
Vibration ISO ISO 28927-2  
Vibration uncertainty (K) 4.5 m/s²  
Width 78 mm 3 "
Working Torque Range (fwd) 95 - 750 Nm 70 - 555 ft.lbs