Your browser is not supported

You are using a browser we do not support any longer. To continue visiting our website, please choose one of the following supported browsers.

Our global presence

Please select a business area and your country and language.

Close

Not quite sure about what you are looking for?

Use the links below to jump directly to the most searched topics

Welding: surface preparation, weld seam cleaning, finishing

Chicago Pneumatic supports you throughout all your metal welding processes, from surface preparation to weld seam removal and finishing. Our range of angle, vertical and die grinders, angle and belt sanders is designed to optimize your metalworking applications.

Contact us Download our expert guides

Our top tools selection for welding: vertical and angle grinders, angle sanders, belt sanders, die grinders

mock-up cover

Discover the trends in materials within heavy-duty industries

Download our white paper now

Loading...

Working with tools & abrasives: how to choose the right tool?

1. Metal plate preparation

For metal plate fabrication, surface preparation can be carried out using an angle grinder (4”, 4.5" or 5"), a die grinder for chamfering, or a vertical grinder (7” or 9”) where a very high material removal rate is required. Resinoid grinding wheels or flap wheels are recommended.

2. Weld seam removal

After welding, weld seams are removed to make the surface flat and/or the corners sharp again. These activities are carried out with angle grinders (4”, 4.5" or 5") with traditional wheels, or die grinders with mounted points or carbide burrs. If cleaning is required for painting applications, a wire brush is recommended.

3. Surface finishing

Finishing operations are performed to achieve a smooth surface finish or to prepare for metal for painting. Rotary, belt or orbital sanders are used with sanding pads, abrasive discs or belts.

  Vertical grinders Angle grinders Angle sanders Belt sanders Die grinders  
  CP3349 CP3550 CP3650 CP3850 CP3550 CP3550 (low speed)
CP3650 CP3850 CP5080 CP3550 CP3119
Power (Hp/W)

4.0  hp /

3000 W

1.5 hp /
1100 W
2.4 hp /
1800 W
2.8 hp /
2100 W
1.5 hp /
1100 W
1.5 hp /
1100 W
2.4 hp /
1800 W
2.8 hp /
2100 W
0.5 hp /
400 W  
1.5 hp /
1100 W
1.2 hp /
900 W
Abrasives
  • Depressed center wheel
  • Cutting wheel
  • Cup wheel 6"
  • Depressed center wheel
  • Cutting wheel
  • Depressed center wheel
  • Cutting wheel
  • Depressed center wheel
  • Cutting wheel
Sanding pad

Sanding pad

Sanding pad

Sanding pad

Sanding belt

Mounted top
Carbide burr

Mounted top
Carbide burr

Abrasive size 6" - 9" /
150 mm -
230 mm
4" - 6" /
100 mm -
150 mm
4.5” - 6” /
100 mm -
180 mm
7" - 9" /
180 mm -
230 mm

5" - 7" / 125mm-180mm

5" - 9" /
125 mm -
230 mm
5” - 7” /
125 mm -
180 mm
7" - 9" /
180 mm -
230 mm
1/2x12" - 1x18 /
13x300 mm -
25x450 mm

Erickson  

CNOMO

Erickson

CNOMO

Applications in welding
  • Surface preparation
  • Chamfering
  • Surface preparation
  • Weld seam removal
  • Chamfering
  • Surface preparation
  • Weld seam removal
  • Chamfering
  • Surface preparation
  • Weld seam removal
  • Chamfering
  • Surface preparation
  • Finishing
  • Polishing
  • Finishing
  • Surface preparation
  • Finishing
  • Surface preparation
  • Finishing
  • Cleaning with limited access
  • Weld cleaning
  • Chamfering
  • Cleaning with limited access
  • Weld seam removal
  • Chamfering
  • Cleaning with limited access
  • Weld seam removal
Special features
  • Governed motor
  • Robust housing
  • Built-in lubricant tank
  • Superior torque
  • Rotative guard
  • Governed motor
  • Spindle lock button
  •  Governed motor
  • Highly durable bevel gear
  •  Swiveling air inlet
  • Multi-position vibration damping side handle
  • Spindle lock button
  • Protective rubber on angle head
  • Governed motor
  • Spindle lock button
  • 360° adjustable air exhaust with integrated muffer
  • Multi-position 360° anti-vibration side handle
  •  Governed motor
  •  Swiveling air inlet
  •  Spindle lock button
  • Governed motor
  • Low speed perfect for sanding operations on stainless steel and composite
  • Swiveling air inlet
  • Spindle lock button
  • Governed motor
  • Highly durable bevel gear
  • Swiveling air inlet
  • Multi-position vibration damping side handle
  • Spindle lock button
  • Protective rubber on angle head
  • Governed motor
  • Spindle lock button
  • 360° adjustable air exhaust with integrated muffer
  • Multi-position 360° anti-vibration side handle
  • Simple and robust design
  • Head pivots 360° for multi position sanding
  • Governed motor
  • Swiveling air inlet
  • New mechanism to lock collet holder for easy change of mounted point or carbide burr
  • Governed motor
  • Steel housing
Anti-vibration option (autobalancer) Yes No Yes Optional (not for ANSI market) No No Yes Optional (not for ANSI market) No No No
Célia Esnault- Global Product Marketing Manager at Chicago Pneumatic

Choosing the right tool is crucial, considering that grinding weld seams constitutes up to one-third of the tasks performed by welders and fitters.

Célia Esnault , Global Product Marketing Manager at Chicago Pneumatic

3 Safety tips when working with pneumatic grinders

  1. Speed: Make sure the tool’s speed never exceeds the abrasive’s maximum operating speed (MOS).
  2. Air: Make sure you have a good, tight connection between the air line and the tool’s inlet. Use Teflon tape or similar to help achieve this. 
  3. Abrasive: Always use an abrasive designed for the job: i.e. only use a cutting wheel for cutting and a grinding wheel for grinding.

Célia Esnault- Global Product Marketing Manager at Chicago Pneumatic

To prevent overheating and metal melting onto the abrasive, use caution when working with stainless steel and aluminum due to their lower heat conductivity. Avoid excessive pressure and choose the appropriate abrasive for the task.

Célia Esnault , Global Product Marketing Manager at Chicago Pneumatic

The welding process

Welding is a very important stage of fabrication. However, for any welding process to be efficient and accurate the material must be prepared properly so that it is in the best possible condition for the next step. This can be achieved by effectively removing coatings such as paint, oils, greases, and rust (oxides).

It is crucial to remove impurities such as rust and mill scale when working with carbon steels. However, when working with stainless steels, it is often important to remove chromium oxide if a shiny decorative finish is required.

Nonferrous materials present their own challenges in the weld preparation process. For example, oxidation can take place very quickly on metals such as aluminum and titanium, and so there is a short time frame between surface cleaning and welding. If large areas are cleaned too early this often results in needing to rework the piece.