Your browser is not supported

You are using a browser we do not support any longer. To continue visiting our website, please choose one of the following supported browsers.



Torque limited in forward: 60/70 ft. Lbs. - 90/100 Nm
Full power in reverse
One Hand Operation: 2 power setting positions
Insulation & Comfort: Contoured comfort grip handle instead of TPR injected in handle
Low sound level
Suited for all light vehicle tire changing applications


1/2" composite impact wrench with friction ring socket retainer
2 setting positions : one in Reverse and one Torque Limited in forward
60/70 ft. lbs. - 90/100 Nm in torque limited position in forward
920 ft.lbs - 1,250Nm of maximum torque in reverse
Aluminum clutch & rear housings
Thermo-plastic rubber injected in housing - Resistant to most chemicals used in workshops
Universal & durable twin hammer mechanism
Full teasing trigger
360° swivel air inlet

The CP7748TL series is intended to be used as a “snugging” tool prior to final tightening with a calibrated torque wrench to reach the car manufacturer’s specified torque rating for wheel assembly.
Torque results vary greatly depending on the type of wheel, air pressure, run time and many other factors.

Part number8941077485
Actual air consumption10 l/s22 cfm
Air inlet thread size1/4 "
Average air consumption2 1/2 l/s5 1/2 cfm
Blows per minute850
Box dimensions 264*192*75 mm 10.4*7.6*3 "
Clutch typeTwin Hammer
European StandardsEN ISO 11148-6:2013
Free speed8200 rpm
Handle typePistol
Length250 mm9.8 "
Maximum Torque (reverse)1250 Nm920 ft.lbs
Min. hose size10 mm3/8 "
Net weight2.4 kg5.3 lb
Over carton 406*282*403 mm 16*11.1*15.9 "
Power/weight ratio520.8 Nm/kg174
Side to center38 mm1 1/2 "
Socket retainerFriction ring
Sound Power97 db(A)
Sound pressure86 db(A)
Square drive1/2 "
Vibration4.8 m/s²
Vibration ISOISO-28927-2
Vibration uncertainty (K)1 1/2 m/s²
Working Torque Range (fwd)90 - 140 Nm66 - 103 ft.lbs