Loading
September 30, 2019
Calibration process is a vital step in ensuring tools are working as they should be, giving correct readings, providing a safe working environment for end-users, and ensuring that companies are upholding their legal obligations. However, calibration ...
September 12, 2019
Chicago Pneumatic is supporting breast cancer research and local communities with the launch of a special limited-edition impact wrench dedicated to raising vital funds. Profits from sales of this pneumatic tool will be given out to local breast canc...
August 26, 2019
Have you found that your pneumatic tool is underpowered or not running as expected? Well, it could all come down to your air line accessories and/or connection, rather than the tool itself. It’s worth quickly checking your air line installation – a s...
July 22, 2019
With the right tool, drill bit and speed, virtually any material can be drilled. Whether you’re drilling through composite material or hardened steel for an oil and gas or metal-working application, the drill’s speed has the most impact on the qualit...
July 5, 2019
Chicago Pneumatic has developed industrial drills with ATEX certification for use in ATEX zones 2 (gases) and 22 (dust) to increase the safety of industrial maintenance operators in potentially explosive workplaces. Two ranges of Chicago Pneumatic dr...
June 25, 2019
We often get asked this age-old question: “Should I choose pneumatic or electric power tools?” Many users believe that one tool technology is best for everyone and every application. But that’s just not true.
May 27, 2019
Making your workplace as safe as possible to minimize the risk of accidents is one of your highest priorities. Here are some best practices you can take to improve safety when using pneumatic tools, while also decreasing your company’s total cost of ...
April 23, 2019
Follow our 3 simple steps to make sure your air line installation is providing the right pressure and that your accessories selection is correct.
March 24, 2019
Your tool stalls or is not working to its expected performance and you find yourself asking ‘why is my angle grinder spinning too slowly?’, or ‘why has my pneumatic grinder stopped working?’, read on.
March 15, 2019
Chicago Pneumatic has introduced a new low vibration hammer that is ideal for everyday general mechanic, body shop and MRO (maintenance, repair and operations) applications. There are two versions – CP7160 and CP7165 – that are comfortable to use and...
March 15, 2019
Chicago Pneumatic has launched a new series of rivet squeezers and hammers developed exclusively for the aerospace maintenance, repair and operations (MRO) market. The CP42 series comprises ergonomic squeezers and lightweight rivet hammers, which are...
March 8, 2019
ref text Chicago Pneumatic has introduced a new powerful ½” impact wrench for vehicle service specialists. Built upon the heritage of the successful previous model, the CP7748 has been designed to offer operators unparalleled levels of power, comfort...
February 25, 2019
Three tips to ensure your team is providing the right level of torque and follows manufacturer’s specifications.
January 21, 2019
There are many types of sockets on the market, but all can be split into two categories: impact sockets and regular sockets.
December 18, 2018
Here we explore how explosive atmospheres can occur and why it’s important to consider ATEX and NEC certifications when buying new equipment.
November 20, 2018
Working on roadside assistance jobs can be challenging to provide the same high-quality results as you do the job in the workshop. Here are some tips to do your job quickly and efficiently, while ensuring safety and productivity.
November 16, 2018
Chicago Pneumatic is introducing its new range of industrial vertical grinders, the CP3330 and CP3340 series, to foundry workers, metal fabricators and MROs worldwide. These industrial tools set a new high standard in terms of productivity and operat...
October 30, 2018
Chicago Pneumatic launches its next generation ¾” impact wrench for use in MRO, general mechanic and medium and heavy vehicle repair applications. The new CP7769 version is more compact, ergonomic and seven per cent lighter than its predecessor helpi...
October 15, 2018
Pneumatic impact wrenches were originally meant for loosening stubborn nuts and bolts. However, nowadays mechanics use impact wrenches for tightening bolts too, for example on wheels, so they can do their jobs faster, with more efficiency, and increa...
September 17, 2018
To complete its air hydraulic jack range, Chicago Pneumatic launches one new high lifting capacity air hydraulic jack, the CP85031, for tire changing & general mechanic applications.
September 17, 2018
Chicago Pneumatic is adding a new ultracapacitor batteryless jump starter to their range, CP90600, to be able to start light and heavy vehicles up to 24V. Those are great “must have” products for your workshop or for roadside assistance.
September 17, 2018
Power tools are a key to productivity in the oil & gas or the metal working industry. Maintenance and production tasks must be carried out efficiently, however intensive use of vibrating power tools, such as grinders, can expose operators to Hand Arm...
July 23, 2018
Providing a safe working environment for operators is essential, especially when using pneumatic tools and compressed air. If there is a failure in the air network and the hose is not adequately clamped, the resulting whiplash could be devastating. F...
July 11, 2018
The CP7782TL-6, the first and only 1’’ impact wrench torque limited, is the ideal tool for heavy vehicle tireshop applications.
June 25, 2018
There is no industry standard to measuring and reporting on torque values, and torque is presented differently by tool manufacturers. The various methods of measuring torque have ultimately led to much confusion amongst tool users as to which values ...
June 19, 2018
Chicago Pneumatic is making it easier than ever before for mechanics, vehicle service professionals and tire shop managers to make the right tool selection, ultimately helping them to enhance operator wellbeing as well as improve productivity. We hav...
June 1, 2018
The new CP8849 ½” cordless impact offers many features to put the operator in full control. This rugged and powerful tool is ideal for tire shop and general mechanic applications on light vehicles as well as MRO applications.
May 28, 2018
Maintenance managers and health and safety executives that learn to protect their workers from Hand Arm Vibration Syndrome (HAVS) will increase the company productivity, profits and reputation.
May 2, 2018
These tools are designed to be easy to handle through ergonomic features such as a keyless rotative safety guard for easy operator adjustment to all work configurations as well as a rotative air swivel that allows for easier tool operation and avoids...
April 25, 2018
Chicago Pneumatic is introducing two new additions to its range of CP Cordless range, the CP8345 and CP8350, which combine efficient performance with a highly ergonomic design that maximizes comfort for end users. The new 4.5’’ (115 mm) and 5’’ (125 ...
April 23, 2018
Pneumatic tools are built for the most intensive usage and are vital players in industrial environments, but their maintenance needs can be easily overlooked. However, the appropriate care of pneumatics tools is key to ensure productivity, meet clien...
April 18, 2018
Chicago Pneumatic has marked the first sale of its CPSG range of generators in Egypt after its authorised distributor, ARAK Heavy Equipment, received two separate orders in a matter of months.
March 29, 2018
Professional Distributor, a magazine serving the automotive tool and equipment distribution channel, offers this month best practices on torque tools, highlighting some important information on recommending the right tool to end users.
February 26, 2018
With the right solution, it’s possible to improve both working conditions and quality in the heavy vehicle tire changing industry.
February 21, 2018
The new Chicago Pneumatic composite drills are available now in ¼’’, ⅜’’ and ½’’ pistol, straight (in-line) and angle variants. The range comprises 13 models, including reversible and non-reversible options.
January 30, 2018
Getting the job done quickly is for sure the main concern for all tire changing specialists, even more while being on the road. One of the most important things to consider is which tool to use to do the job.
December 14, 2017
FRL units ensure the air quality for your tools, optimizing tools performance and lifespan. Discover 4 things to consider when buying a Filter Regulator Lubricator.
December 11, 2017
The new Chicago Pneumatic CP825C series is a range of composite air ratchets, ¼” and 3/8”, meant to upgrade our existing CP825 series. Offering high accessibility to tight spaces such as motor engine comportments as well as high speed for fast rundow...
December 1, 2017
爱 · 在CP — 衣“旧”情深 这次活动是资源的再利用，更是一场爱心的传递，让我们学会感恩，也让贫困山区的孩子们能度过一个温暖的冬天。
November 8, 2017
芝加哥气动压缩机携最新空压机行业的领先产品、技术和解决方案亮相会场，吸引众多参观者驻足咨询。
November 7, 2017
On top of the load applied by the operator on the tool (the feed force), one of the key factors impacting greatly the time taken to complete the grinding job, is the tool’s capacity to run the chosen abrasive at the right speed.
October 26, 2017
Thinking of pneumatic grinders, most of the professionals in industries such as metal working, fabrication, foundries & casting plants or even shipbuilding, would only consider the type of abrasive wheels when choosing their tool, which is not en...
October 19, 2017
Learn how to size a piston compressor based on your needs.
October 10, 2017
In order to achieve the greatest results for vehicle body painting, clean, dry air is a requirement. Learn more about how you can optimize your air supply in order to get the best results
October 5, 2017
Chicago Pneumatic is now offering an ALL-IN-ONE solution to renew yellow headlights for light and heavy vehicles, our CP 7205-HLRK Headlight Repair Kit.
September 19, 2017
Chicago Pneumatic Tools has been given a starring role in a new episode of TV series Wicked Inventions. The pop science series looks at the way items are invented, manufactured and used to change the world around us.
September 1, 2017
芝加哥气动压缩机不断推陈出新，推出新一代静音高效型螺杆空气压缩机CPM-50，该空气压缩机设计排气压力7-10bar，排气量5.6m3/min-6.2m3/min。
August 31, 2017
Two options exist today for pneumatic torque wrenches: stall torque tool or shut-off tool, what's the difference?
August 25, 2017
Chicago Pneumatic launches its new ergonomic seat solution, the CP87029 Ergoseat, to be used for tire changing and general mechanics in workshops or on roadside assistance. This very simple solution fits both medium and heavy vehicles.
August 21, 2017
An impact wrench is a socket wrench power tool designed to deliver a high-torque output with minimal exertion by the user. It stores energy in a rotating mass, accelerated by the motor, to then deliver it suddenly to the output shaft (the anvil), cre...
July 6, 2017
Chicago Pneumatic launches its first compact and robust pneumatic nutrunner, the CP66 series, perfect for flange-related and other bolting applications in the oil & gas, power generation, and wind energy industries. It also provides a more durable, p...
July 4, 2017
Chicago Pneumatic is launching two new lightweight and powerful impact wrenches for heavy vehicle tire changing applications in workshops or for roadside assistance.
June 30, 2017
On June 28, 2017, Chicago Pneumatic Tool Co. opened a new tool showroom for customers and distributors at their Rock Hill location. The space spans 12,000 square feet featuring tools for numerous industries from automobile vehicle service to industri...
June 21, 2017
芝加哥气动工具产品，在1998年已经进入中国，2014年芝加哥气动将空气压缩机及空气处理产品引入到中国，为中国的用户提供一站式专业的产品销售和服务。
June 20, 2017
Chicago Pneumatic launches the first real ¾’’ stubby impact wrench to be used for heavy vehicle general mechanic applications in workshops or for roadside assistance.
June 17, 2017
选用什么空压机配件一直让很多空压机用户犹豫不定，用原厂配件吧，价格贵了点，用替代品吧，对质量又不放心。今天就带大家来看看，一个空压机生产厂是如何选择配件的。
March 31, 2017
The Chicago Pneumatic CP872 aluminum die grinder, built to excel in daily maintenance and auto body shop applications, is ideal for surface preparation, auto body. Designed for applications like chamfering, weld seam or rust removal on frames and bod...
March 20, 2017
A torque wrench is a tool used to control and apply a specific torque to a fastener such as a bolt or a nut. It is a fundamental element in general mechanics, tire changing operations and industrial maintenance & repair industries, to ensure customer...
March 17, 2017
Manufacturers specify the right tightening value for every fastener on a vehicle. This is for a reason: SAFETY, not only for the driver but also for the passengers, and anyone that will come across the vehicle.
March 1, 2017
Does your team use handheld power tools, such as industrial impact wrenches or grinders? Check out our 7 tips to reduce their exposure to Hand Arm Vibration Syndrome (HAVS).
February 14, 2017
These powerful new Chicago Pneumatic ultracapacitor boosters are designed to safely jump start a flat battery within seconds, even in adverse conditions. The ultracapacitor technology is able to harness the power from a weak battery and boost it to s...
February 9, 2017
The air pressure alone is not enough for your tool’s performance: don’t underestimate the accessories!
February 9, 2017
"A clean air installation guarantees productivity and return on investment." Damien Feller, Technical Support Expert
February 8, 2017
The latest edition of Wind Energy Network magazine has featured our distributor Torque Solutions Ltd who is now carrying our full range of solutions for the renewal energy market. From impact wrenches to hydraulic bolting solutions, they are now abl...
February 6, 2017
Both CP7732C & CP7737 were put to the test by the owner Phil Crafford and Ben Enter at Dream Automotive, Honda performance specialists in Watford. They were found to be real time savers, making the tasks much easier and efficient.
January 26, 2017
To complete its jack stand range, Chicago Pneumatic launches two new high capacity jack stands for supporting trucks, buses, trailers, and equipment in fleet garages, agricultural, industrial and construction environments.
January 18, 2017
Powered by a 0.5HP (410W) motor, these reversible pistol drills are perfect for drilling, tapping and reaming in industrial production and maintenance applications.
December 13, 2016
Chicago Pneumatic’s CP7732C, CP7727 and CP7737 compact impact wrenches have been voted ‘Top Products 2016’ by the readers of the Commercial Vehicle Workshop magazine.
November 16, 2016 - November 18, 2016
This year’s Fabtech show will feature new additions to Chicago Pneumatic’s line of industrial tools. These include new powerful screwdrivers, reversible drills, and durable steel clutch housed impact wrenches. In addition, visitors will again have ...
October 5, 2016
The new series consists of two pistol grip versions, CP2816/CP2817 and two straight versions, CP2828/ CP2829.
September 20, 2016
Our CP26X Screwdrivers Range Creates “Operator Choice”
September 8, 2016
Chicago Pneumatic has launched a new series of air hydraulic jacks, extending its workshop equipment range for professional vehicle maintenance customers. The CP85XXX range of high quality, high lifting capacity air hydraulic jacks are perfect for ti...
September 6, 2016
We are delighted to have won this year the Innovation Awards from Professional Tools & Equipment (PTEN) magazine for our new best in class CP7737 compact angle impact wrench. This unique ultra-compact & lightweight design, already approved by our cus...
July 14, 2016
Commercial Vehicle Workshop magazine asks Carl Klinkenborg why Chicago Pneumatic products are his tools of choice. Carl gives his verdict on the latest compact impacts recently added to the range.
July 5, 2016
After featuring our CP75 grinders series on its May's cover, Maintenance & Engineering Magazine website keeps on commenting the CP latest grinders: "Chicago Pneumatic Grinders Provide Customer Value!"
June 28, 2016
Chicago Pneumatic Tools is the proud sponsor of FreestyleMX.com Inc, the longest running FMX Tour in the world. In addition to the FMX tour, Chicago Pneumatic Tools, would also like to welcome MB Motorsports to the family!
June 20, 2016
Following its Tools for Colleges initiative in February, Chicago Pneumatic has made a visit to each of the five colleges that received tools to see first-hand what they thought.
June 3, 2016
In April, Off-shore Europe Journal reviews the CP67x3 straight impact wrenches.
June 3, 2016
The headline of this month's Maintenance & Engineering Magazine front-page lead was: "CP75 Series: durability at a whole new level".
May 18, 2016
This month, Engine Builder Magazine publishes an article about the Chicago Pneumatic ultra lightweight ½″ impact wrench.
May 11, 2016
Chicago Pneumatic has issued some useful advice to workshops on ensuring a quality air supply in the workshop by using an FRL system (Filter, Regulator, Lubricator) on air lines. The leading tool and equipment supplier says FRL systems have a vital t...
May 10, 2016
At Chicago Pneumatic, all is about People. Passion. Performance. And so it is for Szabo Istvan and Miklos Laszlo, two self-made drivers belonging to the Romanian Hell Drift Team. We are very proud to support this team, and help them to rock the finis...
May 9, 2016
Carl Klinkenborg owner of Beetlebank, takes time out from his busy schedule of refurbishing air-cooled Volkswagens to evaluate the new CP75 Series grinders, designed specifically for the Industrial / MRO and Automotive markets.
May 4, 2016
April 21, 2016
Whether your industrial tool needs are for general maintenance, heavy production or virtually anything in between, Chicago Pneumatic has the tooling that can meet your demands.
April 13, 2016
The new Chicago Pneumatic CP7732C is an ultra-compact and powerful ½’’ composite impact wrench. At only 4.3" long (108 mm), this stubby impact wrench is ideal for very restricted areas, like transmission and engine work. Since this tool is shorter th...
March 29, 2016
With even higher power than the previous generation and fantastic ergonomics, the new CP6120-D35H/L sets new standard and confirms Chicago Pneumatic’s position as the leading super duty 1-1/2 inch impact wrench manufacturer.
March 25, 2016
The new Chicago Pneumatic CP7727, CP7737 angle impact wrenches are the best in class in terms of compact design, low weight, high power and durability, and expected to set new high levels of performance. The user-friendly angle wrench has a revolutio...
March 8, 2016
The robust CP6763-D18D ¾” and CP6773-D18D 1” wrenches were previously available in pistol version only, but have now been designed in a straight version with D-handle to give users more flexibility and choice for their applications. There are now fou...
February 26, 2016
Young students will benefit from the use of Chicago Pneumatics pneumatic tooling in their training workshops in the UK & Ireland.
February 16, 2016
In its release of February 2016, Commercial Vehicle Workshop wants its readers to be "well equipped" with a selection of Chicago Pneumatic products. The front cover instantly highlights this impressive range!
February 2, 2016
Discover the new Chicago Pneumatic CP7829 ergonomic ratchets for the vehicle service industry: exceptional power, durability and user comfort.
February 1, 2016
In the January 2016 release of Wind Energy Network, Fliss Chaffer interviews the illustrious duo Peter and Ruth Allsopp, Managing Director and Marketing Manager respectively of Torque Solutions.
January 24, 2016
Whether you need to lift a classic car or a 60-ton truck or even a bus, to work both quickly and safely, you need to have the right equipment. Here is the 6-step guide to make the right choice.
January 19, 2016
Chicago Pneumatic has opened new offices in Varyap Plaza, Istanbul, Turkey. The company is expanding its presence in the country with a new 300 m2 Customer Center to better meet the needs of distributors and customers across many industries.
December 18, 2015
Ideal for weld flux chipping, demolition, scaling in shipyards, large castings cleaning, rivet busting, or removing concrete rest from concrete mixers
December 17, 2015
We are delighted to have won the Air and Electric Company Award, this year from Golden Key 2015 in Russia.
December 9, 2015
Learn more about our just launched new angle grinder for industrial maintenance, repair and operations (MRO). “One of the most powerful angle grinders for its class on the market…”
December 8, 2015
The CP87700 twin wheel dolly offers a 1543 lbs. / 700 kg capacity and provides high maneuverability for heavy vehicles tire changing or undercarriage system operations. Its double action hydraulic piston and its large wheel diameter from 21.4 to 50.5...
December 3, 2015
15% smaller than its predecessor, which means it offers vehicle service professionals access and manoeuvrability in tight spaces.
November 26, 2015
With enhanced durability testing and a new crimping system that gives maximum quality, our new industrial hose reels HR9213 provide the most robust solution ever seen at CP!
November 25, 2015
Made of rugged steel and iron construction, the 4 new models of presses - CP86750 and CP86100 for CE Markets and CP86751, CP86101 for ASME - include many high-quality features to make your job safer, easy and fast. They are the perfect solution for h...
November 12, 2015
The Chicago Pneumatic CP75XX composite angle grinder series for maintenance, and repair operations (MRO) is one of the most powerful angle grinders in its class available on the market today. Ideal for surface preparation, auto body shop applications...
June 5, 2017
It is simple, really. You have work to do, customers to serve. CP is there to help you get the job done, without compromise.
August 8, 2019
客户淮海集团采用我司空压机主要用于生产电动汽车的气动工具供气 Our compressors are used in providing air to power tools of producing electric cars in Huaihai Holding Group
August 8, 2019
Use parts that were specifically designed for your compressor to keep it running like it should
August 8, 2019
全新设计的空气端提供更高效率和更高稳定性，保证压缩机运行的更低能耗。【了解更多】 Newly designed air terminal provide higher efficiency and performance, ensure lower running energy consumption. [Read more]
August 8, 2019
我们提供全系列螺杆式空气压缩机：可靠耐用的工频空压机和高效节能的变频空压机。【了解更多】We provide screw compressors including fixed speed compressors and variable speed compressor.[Read more]
January 10, 2019
Want to help build things that last? We’re not just talking about tools and compressors. Think ships, planes, skyscrapers, highways, dams ... the list goes on and on.
June 5, 2017
Chicago Pneumatic’s dedication to the general and heavy industries spans decades.
October 10, 2017
Since its foundation in the United States in 1901, Chicago Pneumatic has truly gone global. From helping build many of America’s landmarks to our current international presence, Chicago Pneumatic has always emphasized local service to build our glob...
December 22, 2017
The last piece of the puzzle is our Engineering Support Department (ESD), the team that manages the product’s entire life from launch to obsolescence. They are an integral part of our continuous product improvement as they learn everyday from the fie...
December 22, 2017
To transfer a simple idea into innovation requires vision and determination. Engineers that put forward an idea must prove its worth and share its vision at every stage of its development. They have to be able to question themselves at any time: wil...
December 22, 2017
Our mechanical engineers are involved at every step of product development. They are the people who will make sure that all the pieces designed for the product will fit together precisely and will work perfectly.
December 22, 2017
Different types of simulation exist and are used by our team to improve our product development. 3D design is the best way to predict product behaviors quickly and easily.
December 22, 2017
Our products are designed and engineered based on our customers’ needs and challenges. We strive to innovate and improve our products to make our customers’ lives easier and more comfortable every day.
June 5, 2017
See Corporate News and Partner News for press releases about the CP Brand initiatives and business development. Product News and Application Stories for information about the latest CP innovations.
October 12, 2018
What if you could combine the performance of air tools with the mobility of cordless? That is exactly what CP is bringing to automotive and maintenance professionals. The new CP battery-powered tools offer the highest level of power and torque. Desig...
April 13, 2018
There comes a time when the best-known products go beyond the standard they set to become must-have Classics. Chicago Pneumatic is Proud to Bring Together the Tools You Already Know: The Classic Range. For decades, these Classic Chicago Pneumatic pr...
August 30, 2017
In response to user demand and market trends for smaller, lighter tools, Chicago Pneumatic is launching its most compact and lightweight air tools for the automotive aftermarket. Our ultra-compact range is ideal for use inside the vehicle and engine ...
August 30, 2017
Chicago Pneumatic has launched a new series of air hydraulic jacks, extending its workshop equipment range for professional vehicle maintenance customers. The CP85XXX range of high quality, high lifting capacity air hydraulic jacks are perfect for ti...
December 15, 2017
Full product catalog and technical literature always at hand, even without internet
December 15, 2017
With eConnect place and track your orders for tools & original spare parts, anytime, anywhere.
February 28, 2018
Direct access to CP Tools application photos, and product images usable for your catalogs through our online Multimedia Gallery.
December 15, 2017
Exclusive monthly short eNewsletter to know more about Chicago Pneumatic Tools business.
December 12, 2018
Making life easy for our partners is a goal we strive to meet in all aspects of the business! This extranet is going to help you every day in finding and sharing useful information. First you can register yourself, and we will send you personal acc...
December 15, 2017
The CP Cloud is an extranet dedicated to the CP Tools distributor network, it has been designed to easily share high-value information and interact with our partners.
June 5, 2017
Where can I get the exploded view of my tool? How do I access the Chicago Pneumatic Online Catalog? Find the answers to all your questions in our FAQ.
January 26, 2018
Find here all valuable information that will help you get the best from your tools and protect the users.
August 27, 2019
When the French government launched the Optical fiber for all project, HEP Industrie, a French based utility vehicle supplier, started to look for a partner that could provide a compact and reliable compressed air source.
June 8, 2017
Our Chicago Pneumatic Kits provide you with all the spare parts you will need for the most common maintenance and repair operations, and it comes all in one box.
July 9, 2018
Find your required spare parts and catalogues for construction equipment using our online platform.
March 19, 2019
Chicago Pneumatic people are experienced in air tool technology and aim at delivering the best advice to our customers, to make sure they do the right tool choice for their application.
September 18, 2018
Chicago Pneumatic Tools offers hundreds of quality air tools designed for the specific needs of the automotive aftermarket industry: impact wrenches, ratchet wrenches, drills, grinders, sanders and polishers, cutting tools, and a whole lot more.
June 5, 2017
Answering CP industrial customers' expectation, we are introducing a new Oil and Gas and Petrochemical brochure combining the best selection of CP industrial tools, CP pneumatic tools as well as Titan hydraulic bolting solutions and accessories.
September 18, 2018
What if you could combine the performance of air tools with the mobility of cordless? That is exactly what CP is bringing to automotive and maintenance professionals. The new CP battery-powered tools offer a new level of power and torque. Designed t...
March 23, 2018
Chicago Pneumatic Tools offers hundreds of quality air tools designed for a wide range of maintenance and production applications: impact wrenches, ratchet wrenches, screwdrivers, drills, grinders, sanders and polishers, percussive and cutting tools,...
June 5, 2017
Chicago Pneumatic focuses on all the maintenance, repairs and refurbishing operations of the mining and construction heavy machinery.
June 7, 2018
Stay up-to-date and download the latest Chicago Pneumatic catalogs and brochures. From application catalogs (vehicle service, MRO, mining, heavy machinery, industry, accessories, and many more) to product-related brochures, quickly get the documentat...
August 19, 2019
Since the introduction of Chicago Pneumatic tools in 1901, CP has sought to meet and anticipate customer needs with an ever-growing range of tools. Today the Chicago Pneumatic range includes more than 500 products, many of which have been industry-l...
August 13, 2019
Today the Chicago Pneumatic range includes more than 500 products, many of which have been industry-leading in their innovative way of solving your everyday challenges. The inspiration behind our innovations? You.
June 8, 2017
Our regular inspection visits will provide accurate machine diagnostics and exact recommendations to keep your machinery as productive as possible.
June 8, 2017
The best choice to extend the life of your equipment and eliminate the risk of costly breakdowns.
June 8, 2017
Take your machinery to the next level with our latest solutions and technologies.
June 8, 2017
Service Plan provides scheduled service options that will match the precise needs of your machine.
June 8, 2017
Chicago Pneumatic Overhauls can offer your machinery a new lease on life by returning your equipment to its original high-quality performance standards.
June 8, 2017
Original lubricants are the best way to protect your machine investment, by both maximizing uptime and by improving the resale value of your equipment.
August 8, 2019
Energy Recovery: re-use up to 80% of your compressor’s thermal energy
August 8, 2019
ICONS: insight into your compressed air system, wherever you are
August 8, 2019
Original line filters eliminate oil particles and condensate to make sure you can rely on your compressor for optimal performance.
August 8, 2019
Original compressor lubricants have a unique formula designed for optimal performance, maximizing compressor lifetime and keeping operational costs to a minimum.
August 8, 2019
Match your great compressor with a fast, easy and reliable piping solution that supports the operational excellence of your whole compressed air system
August 8, 2019
Original filters and separators keep the integrity of your equipment intact, protecting it from premature wear and failure
August 8, 2019
变频驱动，节能环保 Variable speed drive, Energy-efficiency and environment-friendly
June 5, 2017
Chicago Pneumatic’s dedication to the automotive industry spans decades. We understand the specific needs of maintaining and repairing cars and truck fleets. In addition to the right power tools, we also develop and build the compressed air and after...
June 5, 2017
Chicago Pneumatic Tools offers hundreds of quality air tools designed for the specific needs of the oil, gas and petrochemical industry. Based on decades of expertise in providing the right tools and equipment to professionals, we have developed a co...
April 25, 2018
EURO 7.6 mm / Max air flow capacity 72 cfm - 34 l/s (Delta 7.2 psi / 0.5 bar) Economical air flow 40 cfm - 19 l/s (Delta 2.9 psi : 0.2 bar)
April 25, 2018
ISO 6150B 8 mm / Max air flow capacity 63 cfm -30 l/s (Delta 7.2 psi / 0.5 bar) Economical air flow 42 cfm - 20 l/s (Delta 2.9 psi / 0.2 bar)
April 25, 2018
ASIA 7.5mm / Max air flow capacity 36 cfm - 17 l/s (Delta 7.2 psi / 0.5 bar) Economical air flow 23.3 cfm - 11 l/s (Delta 2.9 psi / 0.2 bar)
April 25, 2018
EURO 10.4mm / Max air flow capacity 121 cfm - 57 l/s (Delta 7.2 psi / 0.5 bar) Economical air flow 78 cfm - 37 l/s (Delta 2.9 psi / 0.2 bar)
April 25, 2018
ISO 6150B 6 mm / Max air flow capacity 32 cfm - 15 l/s (Delta 7.2 psi / 0.5 bar) Economical air flow 23.3 cfm - 11 l/s (Delta 2.9 psi / 0.2 bar)
April 25, 2018
EF COUPLING - ISO 6150B 8mm / Max air flow capacity 91 cfm - 43 l/s (Delta 7.2 psi / 0.5 bar) Economical air flow 57 cfm - 27 l/s (Delta 2.9 psi / 0.2 bar)
April 25, 2018
EF COUPLING - ISO6150B 11mm / Max air flow capacity 162 cfm - 76.5 l/s (Delta 7.2 psi /0.5 bar) Economical air flow 110 cfm - 52 l/s (Delta 2.9 psi / 0.2 bar)
April 25, 2018
ISO 6150B 6mm / Max air flow capacity 32 cfm - 15 l/s (Delta 7.2 psi / 0.5 bar) Economical air flow 23.3 cfm - 11 l/s (Delta 2.9 psi / 0.2 bar)
April 25, 2018
Economical air flow 48.7 cfm - 23 l/s (Delta 2.9 psi (0.2 bar)) EF COUPLING - ASIA 7.5mm / Max air flow capacity 72 cfm - 34 l/s (Delta 7.2 psi / 0.5 bar)
April 25, 2018
Max air flow capacity 153 cfm - 72 /ls (Delta 7.2 psi / 0.5 bar)
April 25, 2018
Economical air flow 23.3 cfm - 11 l/s (Delta 2.9 psi / 0.2 bar) EF COUPLING - ISO 6150B 6mm / Max air flow capacity 36 cfm - 16.7 l/s (Delta 7.2 psi / 0.5 bar)
April 25, 2018
EF COUPLING - EURO 7.6 mm / Max air flow capacity 79 cfm / 37.5 l/s (Delta 7.2 psi / 0.5 bar)
October 4, 2019
Our expertise in air impact wrenches combined with the convenience and mobility of battery power to provide the first cordless ½” impact wrench with 2 shut-off positions going up to 850+ ft.lbs / 1150+ Nm
