CP hydraulic submersibles are a range of rugged pumps for continuous pumping of water on building sites, in flooded excavations and cellars, and similar situations.
The 2 inch CP pump handles dirty water containing small stones and debris of up to 10 mm. The 3 inch CP submersible trash pump can handle slurry, stone and debris of up to 60 mm diameter!
Cooled and lubricated by the hydraulic oil, they can be left to run dry without damage to the pumps.
Features & Benefits
- Built for tough conditions
- The 2" pump (WAP 2) can handle small stones and debris up to 10 mm
- The 3" pump (WAP 3) can handle stones and debris up to 60 mm in diameter
- Impressive performance in relation to size and weight
- Rugged construction for continuous operation
- Delivered completely with 10 m discharge hose with snaptite coupler
Used for pumping water from building sites, from flooded excavations and cellars, and in similar situations.
|Part Number||Description||Weight||Dimensions HxW||Oil flow||Max working pressure||Pump head max||Discharge||Solids handling up to||EHTMA class|
|1806101441||WAP 2||11||267x215||18-24||100-160||25||2" BSP||10||C|
|1806101442||WAP 3||13||360x300||26-38||140-172||32||3" BSP||60||D|
For detailed technical data please refer to the pdf files below.
CP hydraulic power packs are available in petrol and diesel driven versions, and provide portable power for a long list of applications in the 20-40 lpm/172 bar range.
The light weight CP pick hammer is ideal for horizontal work. The slim designs of the CP hydraulic pick hammer give a good line of sight to the working tool point.
CP hydraulic breakers range from flexible, lightweight models up to super heavy duty models. Whatever the job, large or small, light or heavy, CP has the right tool in its breaker range.
The CP hydraulic rock drill will drill diameters of up to 50 mm and depths down to approximately 6 meters with a standard integral steel in ISO serie 11.
he open cutting face makes the CP cut-off saw easy to use, even under the most demanding conditions.
CP core drills are well suited for drilling concrete, masonry and asphalt materials. They can be operated freehand or mounted in a drill stand.
CP Post drivers is a tough machine with plenty of power that drives posts or rods in most surface material from soft soil to rock-hard asphalt.
With 6 tons of pulling power and an automatic chain-tightening clamp, the CP post puller has the muscle you need to get the job done.
The CP post hole borer is a powerful tool for drilling holes up to 1,3 m deep and 90-350 mm in diameter in hard soil and sand.
Flow dividers reduce flow and pressure, allowing you to run tools from hydraulic-powered carriers.
Hoses are fitted with flat face HTMA quick release couplings for fast, clean and easy connections in all work situations.