CP hydraulic power packs are available in petrol and diesel driven versions, and provide portable power for a long list of applications in the 20-40 lpm/172 bar range.
For site-to-site transportation, two people can lift it into a van. On-site, the CP power pack can easily be wheeled around by one person
Features & Benefits
- Variable-flow on/off valve for simple tool changes and slow start-up
- Gauge displays when it’s time to change the filter
- Available in gasoline, diesel and electrically driven versions
- Several models equipped with Power On Demand, a system that saves fuel by automatically idling the engine when the tool isn’t being used and speeding up when the tool is activated
|Part Number||Description||Engine||Oil flow||Max pressure||EHTMA class||Power on Demand (POD)||Electric start||CE|
|1807008033||PAC P9||9 HP Honda Petrol||20||150||C||Yes||No||Yes|
|1807008026||PAC P9 Non-CE approved||9 HP Honda Petrol||20||150||C||Yes||No||No|
|1807011029||PAC P13||13 HP Honda petrol||20-30||150||C/D||Yes||No||Yes|
|1807011025||PAC P13 Non-CE approved||13 HP Honda petrol||20-30||150||C/D||Yes||No||No|
|1807016028||PAC P18||18 HP B&S Vanguard petrol||20-40||150||C/D/E||No||Yes||Yes|
|1807016034||PAC P18 Non-CE approved||18 HP B&S Vanguard petrol||20-40||150||C/D/E||No||Yes||No|
|1807016045||PAC P18 Twin||18 HP B&S Vanguard petrol||2 x 20 / 1 x 40||145||C/E||Yes||No||Yes|
|1807016027||PAC P18 Twin non-CE approved||18 HP B&S Vanguard petrol||2 x 20 / 1 x 40||145||C/E||Yes||No||No|
|1807011027||PAC D10 non-CE approved||10 HP Lombardini diesel||20||140||C||No||Yes||No|
|1807008047||PAC E6||5.5 kW / 3x400 V / 16A Electric||20||150||C||No||Yes||Yes|
|1807016047||PAC E11||11 kW / 3x400 V / 32A Electric||30||172||D||No||Yes||Yes|
|1807016046||PAC E11 Twin||11 kW / 3x400 V / 32A Electric||2 x 20 / 1 x 40||155||C/E||No||Yes||Yes|
For detailed technical data please refer to the pdf files below.
The light weight CP pick hammer is ideal for horizontal work. The slim designs of the CP hydraulic pick hammer give a good line of sight to the working tool point.
CP hydraulic breakers range from flexible, lightweight models up to super heavy duty models. Whatever the job, large or small, light or heavy, CP has the right tool in its breaker range.
The CP hydraulic rock drill will drill diameters of up to 50 mm and depths down to approximately 6 meters with a standard integral steel in ISO serie 11.
he open cutting face makes the CP cut-off saw easy to use, even under the most demanding conditions.
CP core drills are well suited for drilling concrete, masonry and asphalt materials. They can be operated freehand or mounted in a drill stand.
CP hydraulic submersibles are a range of rugged pumps for continuous pumping of water on building sites, in flooded excavations and cellars, and similar situations.
CP Post drivers is a tough machine with plenty of power that drives posts or rods in most surface material from soft soil to rock-hard asphalt.
With 6 tons of pulling power and an automatic chain-tightening clamp, the CP post puller has the muscle you need to get the job done.
The CP post hole borer is a powerful tool for drilling holes up to 1,3 m deep and 90-350 mm in diameter in hard soil and sand.
Flow dividers reduce flow and pressure, allowing you to run tools from hydraulic-powered carriers.
Hoses are fitted with flat face HTMA quick release couplings for fast, clean and easy connections in all work situations.